SC 3040 product description

$19.99

Categories: ,

Description

3040 CORRECTION COMPOUND uses Nano Technology (NT) to quickly remove deeper scratches and restores the surface to a high gloss finish with the same compound. Can be used with either rotary or dual action machines.
DIRECTIONS:
1. Shake well. Work in the shade on a cool surface.
2. Apply a quarter size (1” diameter or 2.5 cm) amount of product to center of cutting pad. Before attaching pad to machine manually rub pad over the 2’ x 2’ area to evenly disperse compound. 3. Set rotary buffer to approximately 800-1000 RPM. Use cutting foam or wool pad. Set DA polisher to 4-5 ** See recommended pads below. Working a 2’ x 2’ section using moderate pressure to reduce the depth of the scratches to 3000 4.Wipe residue off with a clean, soft towel. 5. Apply a quarter size (1” diameter or 2.5 cm) amount of product to center of Finishing pad. Before attaching pad to machine manually rub pad over the 2’ x 2’ area to evenly disperse compound. 6. Set rotary buffer to approximately 800-1000 RPM. Use finishing foam pad. Set DA polisher to 4-5. For best results use Lamb’s Finishing Pad. Working a 2’ x 2’ section using moderate pressure to finish area to a brilliant shine. 7. Wipe residue off with clean, soft towel. **1000-2000 scratches use LAMB’S H.D. Cutting Pad with the DA system.
**2000-3000 scratches use LAMB’S Fine Cutting Pad with the DA system.

 

Additional information

Weight 2 lbs
Dimensions 8 × 4 × 4 in